One-minute strength check across defined paths
PRODUCT SYSTEM
Isolation & Safety Transformers
Single and three-phase isolation examples with published 4,000 VAC dielectric testing.
01PRODUCT LOGIC
Built around the conditions that determine performance.
Isolation transformers create a defined separation between supply and load. Published product examples cover single-phase and three-phase equipment builds. The source, load, leakage path, earthing and final product standard remain part of the project review.
ISOLATION REVIEW
The isolation boundary has to be defined, not assumed.
Published products range from compact 200 W examples to larger equipment builds. The source, load, enclosure and protective-earth arrangement determine how the transformer can be used inside the final system.
Specific ratings remain configuration-dependent
Do not apply one efficiency value to every design
Example power200, 500, 1,000 and 1,500 W; one selection list extends to 50 kW
Example input110, 220, 380, 440 or 690 V AC
Example output12, 36, 60, 110, 220 or 380 V AC
Insulation4,000 VAC / 2 mA / 60 s strength stated for selected examples
ConstructionOpen coil, terminal-block and three-phase framed routes
Review boundaryConfirm leakage, clearance, earthing and end-product standard for the complete equipment
BUILD REFERENCESConstruction details,
Construction details,
not catalogue decoration.
Representative hardware and assembly photography from the qualified production route. The approved drawing remains the production reference.
01
Published dielectric strength
Selected examples state a 4,000 VAC, one-minute insulation check.
02
Voltage combinations
Examples cover 110–690 V inputs and 12–380 V outputs.
03
Construction options
Single-phase, three-phase, terminal-block and framed formats are represented.
04
Application boundary
Basic isolation is reviewed separately from SELV, medical and safety-critical approval.
PRODUCT FAMILIES
Isolation & Safety Transformers
Select the closest family or send the application directly when the route is not obvious.
01
Single-Phase Isolation
Compact isolation for single-phase control and equipment supplies.
02
Three-Phase Isolation
Isolation and voltage adaptation for three-phase equipment.
03
Voltage-Adaptation Isolation
Isolated step-down and step-up configurations for regional supplies.
04
Medical & Instrument Isolation
Application-led isolation for sensitive and medical equipment, subject to system review.
TYPICAL DATA TO SEND
- Input voltage, frequency and permitted variation
- Output windings, current and duty cycle
- Envelope, mounting and connection requirements
- Ambient, enclosure and environmental conditions
- Final product standard and required documents
ENGINEERING REVIEWSend the drawing,