Custom transformer engineering · 20 VA upward, with selected formats to 20 kVA ESTABLE Engineering Team Complete files · one-business-day reply
CUSTOM POWER TRANSFORMERS

Custom Power Transformers for Equipment Manufacturers

Custom power transformers engineered around the input, output, load, mechanical fit, environment and documentation required by the equipment project.

Toroidal transformer connected to electrical test instruments on a production bench
ENGINEERING REFERENCE / CUSTOM TRANSFORMER PROJECTS Representative production photography. The released drawing, nameplate and test scope define the approved configuration.

What counts as a custom power transformer?

A custom power transformer is defined by the equipment rather than by a single catalogue rating. The design starts with the electrical duty, but the final part must also fit the installed space, connection method, thermal path, environment and project documentation.

ESTABLE's published engineering range begins at 20 VA, with selected transformer formats extending to 20 kVA. The applicable format depends on the winding, isolation, thermal and packaging requirement.

THREE-PART DEFINITION

Electrical. Mechanical. Production.

A drawing is only useful when those three areas agree. A nominal voltage and VA rating alone are not a complete custom transformer specification.

01 / ELECTRICAL

Define the duty

Input, outputs, frequency, VA, load profile, regulation, inrush and insulation requirements.

02 / MECHANICAL

Fit the equipment

Envelope, mounting, leads, terminals, airflow, clearance and the service route around the part.

03 / PRODUCTION

Make it repeatable

Approved drawing, sample criteria, routine test scope, nameplate and revision control.

04 / APPROVAL

Match the evidence

Target standard, declared document scope, sample approval conditions and the configuration covered by the review.

TRANSFORMER FORMATS

Start with the format that fits the requirement.

Customization does not begin with one preferred core. The application decides whether a toroidal, EI, isolation, enclosed or application-specific construction is the practical route.

Custom toroidal power transformer with insulated leads
LOW-PROFILE / ROUND

Toroidal power transformers

Useful where installed height, round footprint, broad winding arrangements or a controlled external field shape the equipment.

Explore toroidal designs
Custom EI laminated transformer with terminal blocks
RECTANGULAR / LAMINATED

EI power transformers

Suitable for compact power and control equipment where a rectangular package, bobbin construction or terminal assembly fits the build.

Explore EI designs
Custom isolation transformer with separately coloured winding leads
SEPARATED SECONDARY

Isolation power transformers

Used when the equipment architecture requires winding separation, voltage adaptation and a defined insulation or shielding route.

Explore isolation designs
Enclosed transformer construction with visible winding assembly
ENCLOSED / POTTED

Protected power transformers

Encapsulation or enclosure can add mechanical, handling and environmental protection, subject to the thermal and sealing route.

Explore protected designs
CUSTOMIZATION SCOPE

What can be defined for the project.

Every item below must remain technically compatible with the others. A requested change can alter regulation, losses, temperature rise, inrush, clearances or production method.

Input and outputVoltage, frequency, taps, tolerance and winding configuration
Power and dutyVA rating, current, continuous or cyclic load, ambient and allowable temperature rise
Winding layoutSingle or multiple secondaries, connection method and winding arrangement subject to review
IsolationSeparated-winding, insulation and shielding requirements determined by the equipment architecture
Mechanical fitEnvelope, mounting, orientation, terminals, leads, cable exits and service clearance
ProtectionOpen frame, enclosure, encapsulation or potting according to the installed environment
DocumentationDrawing, nameplate data, routine-test scope and approved change-control route
PROJECT EVIDENCE

Custom power requirements, documented as project decisions.

These anonymised projects show how electrical duty, protection and delivery or verification boundaries are handled before a configuration is approved.

Weather-protected transformer construction used as a reference for an outdoor lighting project
OUTDOOR LIGHTING · AROUND MARCH 2025

800 VA, 220 V to 24 V for exterior LED lighting

A Sichuan lighting contractor needed a suitable unit and a workable delivery route for an active installation. The project connects electrical fit, weather-protected construction and confirmed availability.

Read the 800 VA project
Isolation transformer construction used as a reference for a medical equipment project
MEDICAL EQUIPMENT · AROUND JULY 2026

200 VA isolation for a 220 V to 110 V system

A South China hospital equipment project required safety isolation, copper-foil shielding and a 4.2 kV dielectric-strength target. The public case distinguishes engineering intent from a verified test result.

Read the medical isolation project
FROM REQUIREMENT TO REPEAT BUILD

A controlled custom transformer process.

The objective is not to collect the largest list of parameters. It is to release a drawing that production, purchasing and the equipment builder can all work from.

01 / BRIEF

Capture the requirement

Electrical data, installed conditions, quantity route, existing drawing or nameplate.

02 / REVIEW

Resolve the design

Core and winding route, insulation, thermal margin, connections and mechanical fit.

03 / APPROVE

Drawing and sample

Release the configuration and confirm the sample criteria when required by the project.

04 / REPEAT

Control production

Keep material, process and test requirements tied to the approved revision.

STANDARD OR CUSTOM

Choose the simplest route that meets the equipment.

A standard example can be faster when it already matches the electrical and mechanical requirement. Custom engineering becomes useful when a real constraint has no catalogue equivalent.

Standard exampleRequirement is already covered by the published voltage, VA and construction envelope
Custom windingSecondary voltage, current, taps or winding arrangement must change
Custom mechanical formInstalled height, footprint, lead exit or mounting cannot fit the standard part
Custom isolation or protectionShielding, separation, enclosure or environmental protection determine the construction
Replacement projectAn existing transformer must be recreated from a drawing, nameplate or measured constraints
MANUFACTURER REVIEW

What a custom power transformer manufacturer should make clear.

The useful comparison is not who uses the most technical adjectives. It is which supplier can connect the requirement, drawing, production route and evidence into one controlled release.

01 / SCOPE

What is genuinely custom

Voltage, winding, lead, enclosure and mechanical changes should be identified explicitly, with the constraints that remain fixed.

02 / REVIEW

Who resolves the design

The quotation should follow an engineering review of load, thermal path, regulation, inrush, insulation and installed geometry.

03 / DRAWING

What is actually released

The approved drawing should define the electrical values, construction, terminals, leads, nameplate and mechanical envelope.

04 / EVIDENCE

What the records cover

Test and document scope should name the configuration and standard it applies to instead of relying on a generic product claim.

QUOTE COMPARISON

Compare custom transformers as delivered designs.

Two quotations are only comparable when the same operating and evidence conditions are visible. This is also where an apparently cheaper first unit can hide thermal, fit or approval risk.

Electrical basisSame input, outputs, frequency, VA, load profile and allowable voltage variation
Thermal basisSame ambient, duty, enclosure and permitted temperature rise
Mechanical basisSame installed envelope, mounting, leads, terminals and service clearance
Approval basisSame drawing, sample criteria, test scope and supporting documents
Repeat basisSame revision control, production checkpoints and change-approval route
APPLICATION ROUTES

Custom power for the equipment, not for a generic catalogue.

Review the application before finalizing the transformer family. Circuit behavior, enclosure temperature, protection and external-field sensitivity often change the correct starting point.

WHAT TO SEND
  • Input/output voltage, frequency and permitted variation
  • VA, continuous current, starting current and duty cycle
  • Winding, isolation, shielding and grounding requirements
  • Envelope, mounting, leads, terminals, ambient and enclosure
  • Drawing, nameplate, sample requirement and target documentation
CUSTOM POWER TRANSFORMER FAQ

Questions before the quotation.

Direct answers for equipment engineers and buyers preparing a custom transformer brief.

Q1

What is a custom power transformer?

A transformer configured around the equipment's voltage, VA, winding, duty, installed space, environment, connection and documentation requirements.

Q2

What information is needed for a quotation?

Input and output voltage, frequency, VA, load profile, voltage-drop limit, winding needs, ambient, enclosure, mounting, connection and target standard.

Q3

Can voltage, VA and windings be customised?

They are core design variables, but every change still requires review of thermal margin, regulation, insulation, inrush, fit and production feasibility.

Q4

Does custom automatically include CE or UL?

No. The transformer and complete equipment must be assessed against the applicable requirements, and evidence is confirmed for the specific configuration.

Q5

Can ESTABLE replace an existing transformer?

Yes, when enough electrical, dimensional, nameplate and connection information is available. See the nameplate replacement route.

Q6

Is every custom design supported by the same test evidence?

No. The drawing, routine-test scope, sample criteria and supporting records are agreed for the approved configuration.

Q7

Custom transformer or modified standard?

A modified standard starts from an existing family. A custom design starts from the equipment and may change the winding, core or mechanical construction. Both require a released drawing.

Q8

What should I compare between suppliers?

Compare the same electrical duty, thermal conditions, mechanical envelope, drawing, test scope, document boundary and repeat-production controls.

CUSTOM TRANSFORMER REVIEW

Send the electrical duty,
fit and environment.

Your choice can be changed at any time through “Cookie settings” in the footer. Essential technologies are required for site operation.

Read the Privacy Policy